314-968-3650 or 800-366-7244 9240 Manchester Road, St Louis, MO 63144

TrueVIS VG Series 64” and 54” Printer/Cutters

Photo of TrueVIS VG Series 64” and 54” Printer/Cutters

With the new TrueVIS VG Series, we didn’t just make a few upgrades to our print/cut technology – Roland reimagined everything. New print heads that deliver beautiful prints more efficiently. New TrueVIS INK that is more vibrant and cost-effective. New cutting technology that increases accuracy. New tech to communicate with your existing phones and tablets. And so much more. The future of print/cut has arrived.

   LIST PRICES

VG-540A:
$17,995.00
VG-640A:
$21,995.00

   LEASE PRICES

VG-540A: $360 US/month
VG-640A: $440 US/month

** For 60 months,
On Approved Credit

  Brochure Download

Download Brochure for TrueVIS VG Series 64” and 54” Printer/Cutters class
  VG-640 VG-540
Printing technology Piezoelectric inkjet
Media Width 8.25in-63in (210mm-1600mm) 8.25in-53in (210mm-1371mm)
Thickness Maximum 39 mil (1.0 mm) with liner for printing
  Maximum 16 mil (0.4 mm) with liner and 9 mil (0.22mm) without liner for cutting
Roll outer diameter Maximum 8.3 in. (210 mm)
Roll weight Maximum 88 lbs. (40 kg) Maximum 66 lbs (30 kg)
Core diameter *1 3 in. (76.2 mm) or 2 in. (50.8 mm)
Printing/cutting width *2 Maximum 63 in (1,600 mm) Maximum 53 in (1,346 mm)
Maximum speed (dual CMYK, 2-pass)  375 sqft/hr.

345 sqft/hr. 

Standard speed (dual CMYK, 6-pass)  153 sqft/hr. 144 sqft/hr. 
Replacable Ink Pouch Type Roland TrueVIS INK
  Capacity 500 cc CMYK Lc Lm Lk +WH
  Colors CMYKCMYK, CMYKLcLmLk, CMYKLcLmLk+WH
Printing resolution (dots per inch) Maximum 900 x 900 dpi
Cutting speed 10 to 300 mm/s
Blade force 30 to 500 gf
Blade offset 0 to 0.059 in (0 to 1.5 mm)
Software resolution (when cutting) 0.000984 in/step (0.025 mm/step)
Distance accuracy (when printing) *3 *4 Error of less than ±0.3 % of distance traveled, or ±0.3 mm, whichever is greater
Distance accuracy (when cutting) *3 Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever is greater
When distance correction has been performed (when the setting for [CUTTING MENU] - [CALIBRATION] has been made): Error of less than ±0.2% of distance traveled, or ±0.1 mm, whichever is greater
Repeatability (when cutting) *3 *5 ±0.1 mm or less
Alignment accuracy for printing and cutting *3 *6 ±0.5 mm or less
Alignment accuracy for printing and cutting when reloading media *3 *7 Error of less than ±0.5% of distance traveled, or ±3 mm, whichever is greater
Media heating system *8 Print heater Setting range for the preset temperature: 86 to 112ºF (30 to 45ºC)
Dryer Setting range for the preset temperature: 86 to 122ºF (30 to 50ºC)
Connectivity Ethernet (10BASE-T/100BASE-TX, automatic switching)
Power-saving function Automatic sleep feature
Power requirements AC 100 V to 120V ±10%, 9.8A, 50/60Hz AC 100 to 120 V ±10%, 7.5A, 50/60 Hz or
Power consumption During operation 1,270 W Approx. 955 W
Sleep mode 40 W Approx. 15.1 W
Acoustic noise level During operation 64 dB (A) or less
During standby 41 dB (A) or less
Environmental Power on Temperature: 15 to 32ºC (59 to 90ºF) [20ºC (68ºF) or more recommended], Humidity: 35 to 80%RH (no condensing)
Power off Temperature: 5 to 40ºC (41 to 104ºF), humidity: 20 to 80%RH (no condensing)
Dimensions (with stand)) 115.95(W) x 29.33(D) x 51.5(H) in
3,080(W) x 1,050(D) x 1310 (H) mm
91.1[W] x 31.3[D] x 50[H] in
 2315[W] x 795[D] x 1270[H]mm
Weight (with stand) 570.78lb (258.9kg) 286.6lb (130kg)
Included items Stand, power cord, blade, blade holder, media clamps, media holder, replacement blade for separating knife, software RIP, user's manual, etc.

*1 The media holder of this machine is exclusively for media with a paper tube core inner diameter of 3 inches. To use a 2 inch media core, please use the optionally available media flanges. *2 The length of printing or cutting is subject to the limitations of the program.
*3 Using Roland specified media, loaded correctly, temperature: 25 ºC (77ºF), humidity: 50 %RH, all pinch rollers are used, 25 mm or more for both right and left margins and 35 mm or more front margin, excluding expansion or contraction of the media. and all correction and adjustment functions of this machine have been made properly. Not assured when the print heater or dryer is used.
*4 Using Roland specified media, print travel of 1m
*5 [PREFEED] menu item must be set to "ENABLE," 64-inch and 54-inch models, media over 610 mm wide, and 4,000 mm long
*6 Provided that media length is under 3,000 mm. Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media.
*7 Using Roland specified media, 64-inch and 54-inch models: data size: 1,000 mm in the media-feed direction, 1,600 mm in the carriage-movement direction.No lamination. Automatic detection of crop marks at 4 points when media is reloaded. During cutting, [PREFEED] menu item must be set to "ENABLE." Excludes the effects of slanted movement and of expansion and contraction of the media.
*8 Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment. The preset temperature may fail to be reached depending on the ambient temperature and media width.

Roland Versa Works Dual System Requirements
Operating system Windows® 10 (32/64-bit)
Windows® 8/8.1 (32/64-bit)
Windows® 7 Professional / Ultimate (32/64-bit)
CPU Intel® Core™2 Duo, 2.0 GHz or faster recommended
RAM 2 GB or more recommended
Video card and monitor A resolution of 1,280 x 1,204 or more recommended
Free hard-disk space 40 GB or more recommended
Hard-disk file system NTFS format
Optical drive DVD-ROM drive

* Roland VersaWorks Dual is a 32-bit application, which runs on 64-bit Windows® with WoW64 (windows 32-bit on Windows 64-bit).

To receive information on the TrueVIS VG Series 64” and 54” Printer/Cutters, complete the form below and click submit.

Would you like to be contacted by a Sales Rep?
Send me periodic emails and special offers
SSL CertificateAuthorized Dot Net Verified Seal